Security Cameras

DKS DoorKing

1520 Stand Alone Card Readers

The model 1520 provides users with a full feature single door stand-alone access control system. The 1520 is available with a built-in proximity card reader or can be ordered as a single door controller allowing the user to add their own 26-bit access control device.

The 1520 is available in two configurations: with a built-in card reader or as a single door controller only.

PRODUCT DOWNLOADS
Model 1520 Product Sheet, 2 pages

DKS DoorKing

1601 Barrier Gate Operator

The 1601 operator is designed for single lane (14 ft. max) vehicular traffic control in high traffic commercial and industrial applications. The 1601 operator is designed so that it can be mounted on either the left or right hand side of the roadway. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.

PRODUCT DOWNLOADS
Model 1601 Product Sheet, 2 pages

DKS DoorKing

1602 Barrier Operator

The 1602 operator is designed for traffic lanes up to 20-feet wide in low use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right hand side of the roadway. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.

PRODUCT DOWNLOADS
Model 1602 Product Sheet, 2 pages

DKS DoorKing

1603 Barrier Gate and Auto Spike System

The DKS model 1603 Barrier Gate Operator / Automated Spike System is designed as a modular system allowing for easy flexibility in different applications and easy installation. The 1603 operator is designed with many advanced features and mechanically links the spikes to the barrier arm. The surface mount spikes are easy to install and do not require any trenching or excavating. The 1603 auto-spike system is ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred. See product sheet for components for a complete system.

PRODUCT DOWNLOADS
Model 1603 Product Sheet, 2 pages

DKS DoorKing

1610 Warning Sign & Signal Light

Warning signs and traffic signals are used with traffic control spikes and auto-spikes to inform drivers that a one way lane condition exist and that proceeding in the wrong direction, or before the spikes are fully retracted, will result in severe tire damage. Warning signs and/or traffic signals should always be used in any traffic control application utilizing traffic control spikes.

PRODUCT DOWNLOADS
Model 1610 Product Sheet, 2 pages

DKS DoorKing

1610 Traffic Control Spikes

Traffic control spikes are ideal for controlling traffic direction and speed through a controlled entry location. Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction by enforcing one-way traffic lanes. Speed bumps force drivers to slow down while driving through the controlled entry point. They are also ideal for keeping vehicular traffic at a safe speed while driving over traffic spikes.

PRODUCT DOWNLOADS
Traffic Spikes Product Sheet, 2 pages

DKS DoorKing

1810 Telephone Entry

With its built-in lighted directory, the model 1810 is a complete self-contained telephone entry system that is ideal for small to medium sized apartment buildings, gated communities, condominiums, office buildings, factories and industrial sites. Managers can easily create and change the directory as needed with a word processing program (templates are available from DoorKing). The 1810 is available in both surface and flush mount styles. Visitors are identified by voice communication via the telephone. Access is granted by pressing "9" on your touch tone telephone, or access can be denied by simply hanging up.

PRODUCT DOWNLOADS
Model 1810 Product Sheet, 2 pages

DKS DoorKing

1834 PC Programmable Telephone Entry System

The model 1834 is an ideal telephone entry system suited for apartment and gated community applications as well as office buildings and industrial sites that have a separate access control system, or require telephone entry only. The single-line LCD display features big 1/2-inch characters for easy viewing and your personalized message scrolls across the screen from right to left when the system is not in use. Our unique "One Touch" CALL button and big A and Z scroll buttons makes this system one of the easiest to use on the market today! For additional security, the 1834 allows you to monitor activity AS IT HAPPENS on your computer display (requires RS-232 connection).

PRODUCT DOWNLOADS
Model 1834 Product Sheet, 2 pages

DKS DoorKing

1835 PC Programmable Telephone Entry System

The model 1835 is an ideal telephone entry system suited for apartment and gated community applications as well as office buildings and industrial sites that have a separate access control system, or require telephone entry only. The single-line LCD display features big 1/2-inch characters for easy viewing and your personalized message scrolls across the screen from right to left when the system is not in use. Our unique "One Touch" CALL button makes this system one of the easiest to use on the market today! The built-in electronic directory, easy to use Remote Account Manager programming software, card reader interface and expandability options make this unit an ideal choice for those applications with a large number of system users and entry locations. Up to 16 card readers can be interfaced with the 1835 to provide access control. Additionally, our elevator control module restricts which floors a guest or system users have access to, making it an ideal system for high rise buildings. For additional security, the 1835 allows you to monitor activity AS IT HAPPENS on your computer display (requires RS-232 connection), and with our anti-pass back memory, you can enable a TRUE anti-pass back system in one of three different configurations; passive, active and trap.

PRODUCT DOWNLOADS
Model 1835 Product Sheet, 2 pages

DKS DoorKing

1837 PC Programmable Telephone Entry System

The Model 1837 is an ideal telephone entry and access control system suited for medium to large apartment and gated community applications as well as office buildings and industrial sites. The eight-line LCD display features big 1/2-inch characters for easy viewing and your personalized message appears on the screen when the system is not in use. Our unique "One Touch" CALL button makes this system one of the easiest to use on the market today! The built-in electronic directory, easy to use Remote Account Manager programming software, card reader interface and expandability options make this unit an ideal choice for those applications with a large number of system users and entry locations. Up to 16 card readers can be interfaced with the 1837 to provide access control. Additionally, our elevator control module restricts which floors a guest or system users have access to, making it an ideal system for high rise buildings. For additional security, the 1837 allows you to monitor activity AS IT HAPPENS on your computer display (requires RS-232 connection), and with our anti-pass back memory, you can enable a TRUE anti-pass back system in one of three different configurations; passive, active and trap.

PRODUCT DOWNLOADS
Model 1837 Product Sheet, 2 pages

DKS DoorKing

1838 PC Programmable Access Controller

The Model 1838 multi-door access controller is ideal for small businesses, office buildings, factories, industrial sites, apartment complexes, or for any application that requires access control and reporting capabilities. The 1838 is a 2-door controller that easily expands to control up to 16 doors. This flexible system allows you to control access by means of encoded cards, five digit PINs (Personal Identification Number), wireless RF control, or with almost any 26-bit weigand devices.

With a 3000 user capacity, 8000 card code capacity and 8000 event history buffer, 31 security levels, elevator control and more, the 1838 out performs other controllers in its class.

PRODUCT DOWNLOADS
Model 1838 Product Sheet, 2 pages

FAAC USA

400 Heavy Duty Hydraulic Operator

The model 400 heavy duty hydraulic swing gate operator is specifically designed for situations needing maximum versatility, such as apartment, subdivision, commercial/industrial and certain residential applications. NOTE: FAAC packages their operators to be fully UL-325 compliant, right out of the box, which means there's no need to purchase any additional peripherals.

PRODUCT DOWNLOADS
Model 400 Product Sheet, 6 pages

DKS DoorKing

6100 Swing Gate Operator

The 6100 series operator is designed to operate vehicular swing gates in commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. The 6100 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

PRODUCT DOWNLOADS
Model 6100 Product Sheet, 2 pages

DKS DoorKing

6300 Swing Gate Operator

The 6100 series operator is designed to operate vehicular swing gates in commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. The 6100 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

PRODUCT DOWNLOADS
Model 6300 Product Sheet, 2 pages

Linear Access

AE-1 Telephone entry system

The Linear® model AE-1 combines telephone entry with full-featured access control, including keyless entry and panic functions. It is extremely easy to operate, making it ideal for a wide range of applications, including apartments, condominiums, dormitories, office buildings, and gated communities. It offers security, convenience, and handicapped access.

PRODUCT DOWNLOADS
Models AE-1 and AE-2 Product Sheet, 2 pages

Linear Access

AK-11 Stand Alone Keypad

The model AK-11 is an exterior digital keyless keypad entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics.

Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs.

PRODUCT DOWNLOADS
AK-11 Product Sheet, 2 pages

Linear Access

AMII Multi Door Access Control

The Linear model AM/II is an extremely versatile access controller for creation of new stand-alone access control systems or for field expansion of existing systems. It offers a wide range of entry options, including a built-in radio for keyless entry and panic functions. Systems can be easily tailored by size. Each AM/II controls up to four ports, but can be networked to link as many as 32. For storage of over 65,000 input devices, names, and events, modular memory can be upgraded in the field.

PRODUCT DOWNLOADS
Model AMII Product Sheet, 2 pages
Model AMII Product Sheet, 2 pages

Sun Power

C50 Vertical Pivot Operator

Built in Emergency Power Supply.The Leader in Mini-Storage Gate Systems. Performance Proven in the Field for Over 20 Years.

• Operator Frame - 2 x 2 x 065 galvanized square tubing.
• Cover - 20 gauge Redi-Kote sheet metal.
• Pivot Post - 4 x 2 x 250 rectangular tubing with 1 1/2 cold roll round shaft.
• Emergency disconnect - Manual release for finger touch opening, with optional 3 way electrical key switch.
• Gate opening time - 6 to 8 seconds.
• Dimensions - Model C-50 W=67" H=50" D=26" Model R-43 W=50" H=50" D=26"
• Capacities -MC50- max gate length 20ft. Max gate height 7ft. -R43- max gate length 16ft. Max gate height 5ft.

Click2Enter

CLICK2ENTER-I RF Emergency access box system

RF Emergency access box system includes complete Click2Enter-I unit installed in polycarbonate enclosure, with security screws for door access, bit/key, mounting package, and "Operator's & Installer's" Guide.

PRODUCT DOWNLOADS
Click2Enter-I Product Sheet, 2 pages
Click2Enter-I Pole Mounting Product Sheet, 1 page

AWID

CS Prox-Linc Clamshell Cards

Standard Clamshell Style Prox Badge. Read ranges from 4in - 24in. depending on reader.

Features:

• Credit Card Size with Beveled Edges
• Customizable with your logo on the front
• Accepts Photo Flap and Self Adhesive Badge Overlays
• Pre-Punched in Portrait Orientation
• Off White Color

Prox-Linc CS Dimensions: 3.375 x 2.125 x .075in (8.57 x 5.4 x .19cm)

PRODUCT DOWNLOADS
AWID Clamshell Cards Model CS Product Sheet, 2 pages

LiftMaster Professional

EL25 Elite Telephone Entry System

The EL25 is beautifully engineered for private residences and gated communities, yet fully adaptable for use in apartment buildings, condo complexes, office parks and commercial sites. It is designed to easily manage between 1 and 25 occupants with a total of 250 access codes. The EL25 can be purchased as a standard unit without any unnecessary options.

PRODUCT DOWNLOADS
Model EL25 Brochure Product Sheet, 6 pages

Secura Key

Entracomp® 26SA Stand Alone Card Access Control Unit

The legendary TOUCH CARD® reader is one of Secura Key's major contributions to Access Control. Secura Key replaced unreliable reed switches and pickup coils with an array of self-calibrating Hall-Effect sensors, which read the polarity of magnetized locations on a Barium Ferrite card. The user places the card on a non-magnetic stainless steel plate, which eliminates the requirement for a card slot, and protects the circuitry from weather and vandalism. Extremely rugged weatherproof housings with high-security locks and steel mounting plates have kept these units in service for many years. They are still widely used in gate, parking, and telephone entry applications due to their reliability and simplicity.

The 26SA single-door card access control unit is fully programmable. Adding and deleting cards, and other programming functions are accomplished by using a special deck of programming cards, another Secura Key innovation. Nonvolatile memory retains programming after a power loss.

A remote open input allows the door or gate to also be controlled from a remote switch. The reader operates on low voltage AC or DC and consumes less than 100 milliamps.

The 26SA may be used with the Secura Key SecuRelay™, which allows the lock or gate control circuit to be remotely located for added vandal-resistance. Lexan® and metal surface housings and a flush-mount housing are available.

PRODUCT DOWNLOADS
Model 26SA-28SA Plus Product Sheet, 2 pages

Viking Access Systems

F-1 Swing Gate Operator

The standard specifications and features of this gate operator showcase the commitment made in its concept and design. Whether it's the simple, clean installation, energy efficient operation, or advanced battery backup function, this operator stands alone in its class.

PRODUCT DOWNLOADS
Model F-1 Product Sheet, 2 pages

Viking Access Systems

H-10 Residential and Commercial Slide Gate Operator

The H-10 gate operator has the capacity to operate slide gates up to 2000 lbs. and 45 feet in length at 100% duty cycle under extreme conditions. It's efficient mechanism provides a solution for high traffic commercial slide gate applications. The Viking H-10 gate operator offers efficiency and technology combined in a single package.

PRODUCT DOWNLOADS
Model H-10 Product Sheet, 2 pages

AWID

KP-6840 Sentinel-Prox Reader and Keypad Combination

The Sentinel-Prox KP-6840 is a combination PIN pad and Switchplate-style Proximity Reader, specifically designed for high-security applications that require dual verification. The Sentinel-Prox KP-6840 proximity reader from AWID offers dual functionality and a superior read range of 6-8 inches. It is designed to mount on a standard single-gang electric wall box or on the surface of an interior or exterior wall. The KP-6840 is rated for indoor/outdoor installations. The KP-6840 comes in dark gray and is sure to blend in with the architectural design of any building.

PRODUCT DOWNLOADS
Model KP-6840 Product Sheet, 2 pages

Viking Access Systems

L-3 Slide Gate Operator

The L-3™ gate operator has the capacity to operate slide gates up to 1200 lbs. and 40 feet in length at 100% duty cycle under extreme conditions. It's efficient mechanism provides a solution for high traffic commercial slide gate applications. The Viking L-3™ gate operator offers efficiency and technology combined in a single package. This operator is UL Listed 18TC UL325 and UL991.

PRODUCT DOWNLOADS
Model L-3 Product Sheet, 2 pages

LiftMaster Professional

MA/MAT DC Barrier Gate Operator

The Mega Arm and Mega Arm Tower are DC-powered additions to the LiftMaster family of gate operators. Designed with a 24V DC (1/2 HP equivalent) motor, these models provide exceptional starting torque and continuous operation, making them ideal for most applications. Constructed with an aluminum alloy chassis, they're corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 6,000 cycles per day with an operator speed of 2.5 seconds to open or close.

PRODUCT DOWNLOADS
Model MA/MAT Product Sheet, 2 pages

LiftMaster Professional

MAS/MAST High Traffic DC Barrier Gate Operator

The Mega Arm Sprint and Mega Arm Sprint Tower are DC-powered, high-speed additions to the LiftMaster family of gate operators. Designed with a 24V DC (1/2 HP equivalent) motor, these models provide exceptional speed, making them ideal for parking applications. Constructed with an aluminum alloy chassis, they're corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 10,000 cycles per day with an operator speed of .9 seconds to open or close.

DKS DoorKing

MicroPlus RF control access system

With automobile manufacturers building code copiers directly into today's cars, it's easy for a supposedly "secure" RF transmitter code to get into the wrong hands. This can't happen with MicroPLUS RF controls. MicroPLUS RF controls provide you with the highest level of security available with RF access controls. Our coding and encryption schemes are not shared with other producers, resulting in transmitter codes that cannot be duplicated or copied. With MicroPLUS controls, you are assured that only the original intended transmitter will activate your access system.

MicroPLUS controls are not compatible with the Homelink system found in many automobiles. Use our MicroCLIK product line for compatibility with the Homelink system.

PRODUCT DOWNLOADS
MicroPlus RF Control Product Sheet, 2 pages

DKS DoorKing

Mounting Posts Mounting Posts

DKS mounting posts are available in two distinct styles; architectural and standard. The architectural posts are typically used with the larger telephone entry systems while the standard posts are used with card readers, keypads and smaller access control devices. A dual-height style is also available for applications that have both vehicular and truck traffic using the system. This style mounting post provides two different heights to attach the access control device to. All mounting posts are finished in a baked-on enamel finish.

PRODUCT DOWNLOADS
Mounting Posts Product Sheet, 2 pages

AWID

MR-1824 Sentinel-Prox Medium Range (MR) Reader

The Sentinel-Prox Medium Range (MR) reader stands out among its competitors for mid-range proximity readers. The MR-1824 is in a class by itself with an industry best 18-24 inches in a compact 8 x 8 x 1 inch enclosure. No more misreads, or fumbling to get the card closer to the reader. The MR-1824 reads at maximum range every time. And, it does so at an unprecedented 600 mA at 12 VDC. It is designed for indoor- or outdoor-mounting applications.

PRODUCT DOWNLOADS
Model MR-1824 Product Sheet, 2 pages

LiftMaster Professional

MSL Mega Slide Operator

The Mega Slide is a DC-powered addition to the LiftMaster® family of slide gate operators. Designed with a 24V DC (1/2 HP equivalent) motor, this model provides exceptional starting torque and continuous operation, making it ideal for most applications. Constructed with an aluminum alloy chassis, it's corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports gates weighing up to 1,000 lbs. and up to 32 ft. in length.

LiftMaster Professional

MSW DC Swing Gate Operator

The Mega Swing is a DC-powered addition to the LiftMaster family of gate operators. Designed with a 24V DC (1/2 HP equivalent) motor, this model provides exceptional starting torque and continuous operation, making it ideal for most applications. Constructed with an aluminum alloy chassis, it's corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports gates weighing up to 650 lbs. and up to 18 ft. in length.

LiftMaster Professional

SL 585 Industrial Slide Gate Operator

The LiftMaster model SL585 is a durable heavy-duty gear-driven operator for use on heavy gates and high-cycle applications such as gated communities and industrial locations. The powerful design supports gate lengths up to 70 feet and gate weights up to 1,600 pounds. A strong powder-coated galvanized steel chassis, all-weather gearbox, as well as a weather-resistant, lockable cover ensure years of rugged and reliable performance. This model is ideal for heavy commercial and industrial installations and is UL325-compliant.

PRODUCT DOWNLOADS
Model SL 585 Product Sheet, 2 pages

AWID

SP-6820 Sentinel-Proximity Card Reader

The Sentinel-Prox SP-6820 proximity reader from AWID offers a stylish look and a superior read range of 6-8 inches. It is designed to mount on a standard single-gang electric wall box or on the surface of an interior or exterior wall. The SP-6820 comes in dark gray or beige and is sure to blend in with the architectural design of any building. The SP-6820 outputs Wiegand and RS 232 formats and is compatible with all access control systems. The electronics is potted with UL-approved potting compound which protects the reader from harsh environmental conditions. It is manufactured in an ISO 9000 certified facility providing for the highest quality standard. The SP-6820 is highly reliable, warranted for life and capable of providing the best read range in its class. Read range of 6-8 inches. Proximity technology, no contact required.

PRODUCT DOWNLOADS
Model SP-6820 Product Sheet, 2 pages

AWID

SR-2400 Sentinel Proximity Special Range Card Reader

The Sentinel-Prox Special Range (SR) reader is AWID's latest engineering achievement. With a respectable read range of 4-5.5 inches, the SR-2400 delivers exceptional read range with no compromise on quality, durability or performance. Designed as an alternative to competitors reduced performance readers for high volume OEM's, the SR-2400 is a fully featured Wiegand compatible reader with LED and annunciator. The SR-2400 reader is metal compensated, resulting in minimal loss of read range when mounted on a metal mullion. The SR-2400 electronics are potted in UL-approved potting compound to seal them against adverse environmental conditions. It is manufactured in an ISO 9000 certified facility providing for the highest quality standard. The attractive enclosure comes in dark gray (standard) or beige and may be mounted on a mullion or directly to an interior or exterior wall.

PRODUCT DOWNLOADS
Model SR-2400 Product Sheet, 2 pages

LiftMaster Professional

SW490 Industrial Swing Gate Operator

The LiftMaster SW490 offers powerful performance for high cycle and heavy industrial swing gate applications. This hefty design supports gate lengths up to 22 feet and gate weights up to 1,000 pounds. Utilizing a weather-resistant powder-coated steel enclosure, a worm gear reduction drive, and high-starting torque motor, the SW490 offers you years of reliable and powerful performance. This model is ideal for demanding industrial applications and is fully UL325-compliant.

LiftMaster Professional

TC1 TriCode One Channel Transmitter

Open a multitude of commercial gates and doors with a single remote. Universal transmitter compatible with Delta, Multi-Code, and Stanley products.

• Single-channel remote control
• 1x10 pole DIP, 3-position slide switch, 1 SPST momentary
• Units can handle both 300 and 310 MHz frequency
• 9 volt carbon zinc battery included

LiftMaster Professional

TCG1 TriCode One Channel Radio Receiver

Open a multitude of commercial gates and doors with a single remote. Universal radio receiver compatible with Delta, Multi-Code, and Stanley products.

• Single-channel commercial receiver
• 1x10 pole DIP, 3-position slide switch
• Units can handle both 300 and 310 MHz frequency
• Weather-resistant housing; suited for outdoor applications; quarter-turn screws for quick and easy programming
• 4 wired leads (3ft.)
• 1 NO relay related at 24V AC/DC at 10A

AutoGate

VPL Vertical Pivot Lift Gate

The Vertical Pivot Lift (VPL) is a unique STAND ALONE gate system. VPL gates are carefully designed to give years of safe and reliable operation. Standard Gate lengths and heights up to 20 feet in steel and 24 feet in aluminum 5-8 feet tall.

• UL-325 Compliant
• 24v DC System w/up to 72 hrs back-up operation
• LED Diagnostic and Input Indicators
• 10 Sec. Operation w/Soft Start/Stop Technology
• Built-in Battery Charger
• Continuous Duty
• Easy Installation and Space Saving Design
• Custom Gate Designs
• Warranty: 3 yr/Comm. | 5 yr/Res. (Limited)

PRODUCT DOWNLOADS
Model VPL Product Sheet, 19 pages

Viking Access Systems

X-9 Residential and Commercial Swing Gate Operator

The standard specifications and features of the X-9 gate operator showcase the commitment made in its concept and design. Whether it's the simple, clean installation, energy efficient operation, or advanced battery backup function, this operator stands alone in its class. Included with the standard package are high quality direct burial cable, the complete control center and the X-9 operator.

PRODUCT DOWNLOADS
Model 760 Product Sheet, 2 pages